Tag Archives: made in China

Update: Late Spring 2019

Standard
Grey clouds are lit from behind over a vast expanse of New Mexico sage
Clouds to the west of our land on a Saturday afternoon in May of 2019.

It’s been a while since I shared an update on what’s happening in my life. It feels like a lot has happened, but not much has changed. Perhaps the problem is that all the things that have happened don’t seem exciting enough for a blog post.

We’ve been living on our land for nearly two months now. We look at mountains and sky every day. The view is amazing. I particularly like to watch the clouds.

Blue sky and puffy white clouds above a camper surrounded by New Mexico sage
This is not our land, but this is what our land looked like before The Man cleared it.

When The Man cleared our property, he removed all the sage plants so rattlesnakes would have fewer places to hide. We were mostly worried for Jerico the dog. A snake bite would be a big ordeal for someone weighing only 35 pounds. Now we wish we had left some vegetation on our property. The Man is trying to grow some grass. We bought a drought-resistant blend from the local hardware store, but so far we’re not having much luck with it. The Man is experimenting with different planting and watering techniques. I recently noticed little green plants volunteering all over our property, so maybe with the sage gone, native plants will make a comeback.

After weeks of struggle, The Man got our solar power system up and running. After watching numerous YouTube videos, he ended up consulting with a representative of a local company that sells and installs solar power setups. He finally got it all figured out, and from the moment everything was connected, it’s all be running fine. The sun rises before 6am these days, and our batteries begin charging immediately. We have enough energy to ignite the refrigerator pilot light (the fridge runs primarily on propane but has an electric starter—ditto the heater), run lights and television (!) at night, charge our electronics, and power The Man’s electric guitar and amplifier. All our needs are met, and I’m proud to get our power from the sun.

We joined the local water association, so we can haul our water from a location closer to our place and pay less for it than we’d been paying in town. We got a 55 gallon, BPA free barrel for hauling the water as well as a 195 gallon reservoir in which to store the water. I’ll be glad to have to haul water less frequently. Going to town every four or five days to buy water was getting to be a real drag.

We put up a prefab metal shed. We completed the project in about four days. First The Man (with a bit of help from me) built the floor from tongue and groove plywood and 4x4s. By the time the floor was complete, the wind had picked up, and we didn’t want to deal with sharp-edged metal panels. We called it a day.

The next day we (mostly he) got the side, back, and front walls built before the wind started. Our first step in wall building was sorting the components. There were probably 100 parts to the shed (mostly sheets of thin metal), and they were boxed together in no particular order. As we sorted according to five-digit numbers stamped on the components, we found many of the pieces had been bent during shipping and had to be finessed back into shape. Once we started the actual building of the walls, we discovered the instructions (mostly drawings with few words) were difficult to decipher. We were pretty sure the person who’d written (drawn) the directions had never actually constructed the shed in question.

Two small green plants growing in the dirt
Some of the plants volunteering on our land.,

On the third day, we put the walls up and attached them to each other and the floor. The process was not nearly as simple as the preceding sentence makes it sound. When The Man started putting up the second side wall, he realized the directions had told him to put a corner in the wrong place. He had to correct the mistake while I held the other two walls in place. When The Man started putting in screws to hold the walls together, he found the manufacturer of the shed had put holes for screws in one panel but not the other. He had to push hard to get the screws through the second piece of metal.

Once the walls were up, we had to construct the roof. Before we were done, we’d run out of the plastic washers that went with the screws to help keep water out of the shed. The kit had come with at least fifty extra screws but not a single extra washer. We had no idea why the manufacturer didn’t throw in a few extra of the kit’s cheapest part. Luckily we found a few washers to do the job in our stash of fasteners.

After about four hours of work, all that was missing was the door. The Man and I were both tired and hungry, and we needed to run some errands in town. We’ll finish this later, The Man grumbled.

The wind had come up strong by then, but the shed didn’t move, even without the door. We were away from home for at least four hours; when we returned, the shed was still standing. We were certainly grateful for this demonstration of the shed’s sturdiness.

While I cooked diner, The Man assembled the shed’s door.

Oh no! I messed it up! I heard him say. He’d used his intuition instead of the instructions, and things hadn’t turned out the way he’d hoped. So he took the door apart and followed the directions exactly. The door was still wrong! Following the directions hadn’t helped one bit!

White metal shed against an overcast sky
Our shed, complete.

Somehow he got the components of the door assembled, and I helped him hang it. Finally—success! After dinner, he dragged the shed where he wanted it on our property. (We built it close to the trailer and not where we actually wanted it to sit because we wanted the trailer to serve as a windbreak during construction.) While I washed the dishes, he loaded the shed with tools and plastic totes and water jugs. Later, I found a padlock and key in the junk drawer and brought it outside to lock the shed’s door. We stood in front of the shed for a few moments and admired our work.

I’m convinced that if our relationship survived us building that shed together, it can survive anything.

I took all the photos in this post.